日本BL快换装置快换盘工具盘QCP-220-T-J16A-XXXB 日本BL快换装置快换盘工具盘QCP-220-T-J16A-XXXB The BL QUICK-CHANGE Model QCP-220 is an automatic end-effector changer used in press handling and loading applications, with a payload capacity of 200kg for large panels and high-speed robots. It can be directly installed on a PCD125 mm robot flange. Master plate Attachments ・6 bolts（M10×65） ・6 plain washers ・1 locating pin Tool plate (QCP-220-T-J16A-XXXB） The BL QUICK-CHANGE Model QCP-220 is an automatic end-effector changer used in press handling and loading applications, with a payload capacity of 200kg for large panels and high-speed robots. It can be directly installed on a PCD125 mm robot flange. Master plate Attachments ・6 bolts（M10×65） ・6 plain washers ・1 locating pin Catalog (PDF) Features of QCP-220D   Utilities specifically for press applications Pneumatic ports (Rc1/2) can be used for vacuum pressure and electrical signals can be used for ID confirmation.   Built-in lock/unlock sensor Due to built-in design, QCP-220 is 12.4% thinner than QC-150C with the lock/unlock sensor.   Faster lock/unlock operation Due to built-in design, QCP-220 is 12.4% thinner than QC-150C with the lock/unlock sensor.   Superior fail-safe locking mechanism BL’s unique lock/unlock mechanism contains a mechanical fail-safe feature which does not allow the Master and Tool plates to uncouple if the air pressure is shut off.