日本Sensatec接近传感器MDS-L5U-5V/MDS-L5U1-5V Rating / Performance Model MDS-L5U-5V MDS-L5U1-5V Detection Surface Upper side detection Detection Distance 5mm±10％ Hysteresis 15% or less of the detection distance Set Distance 0 to 4.0 mm Standard Detection Target Iron sheet of 20 × 20 mm and 1 mm in thickness Power Supply Voltage 5 V DC (Operating voltage range : 4.5 V to 5.5 V DC) Current Consumption 8 mA DC or less Output 30 V DC , 50 mA DC or less NPN transistor open collector Output Residual Voltage 1 V DC or less (Load current 50 mA DC) Operation Status Normally open (ON output when detecting) Normally closed (OFF output when detecting) Operation Indicator Red LED (Lit when the output is ON) Response Frequency 500 Hz or more Temperature Range -20 to 60 °C (-25 to 65 °C storage temperature range) (Without dew condensation or icing) Humidity Range 35 to 85% RH (35 to 85% RH storage humidity range)(Without dew condensation) Dielectric strength 500 V AC for 1 minute (Between the live part and case) Insulation Resistance 50 MΩ or more at 500 V DC megger (Between the live part and case) Vibration Resistance 10 to 55 Hz, 1.5 mm double amplitude in X, Y and Z directions for 2 hours each (at power off) Shock Resistance 200 m/s² (Approx. 20 G) in X, Y and Z directions 3 times each (at power off) Protection IP50 Case Material Polyarylate Connector Connector: S3B-EH (3-pin)(from J.S.T. Mfg. Co., Ltd.) ［Connections］Housing: EHR-3, Contact: SEH-001T-P0.6 (from J.S.T. Mfg. Co., Ltd.) Weight Approx. 5 g Options (Sold Separately) Connector harness : CNH-S3B03S26-300 *For a detailed specification of the other, please refer to specifications. Characteristics Graph (Typical Example)