功能

• Applicable F Tube Size: φ6.4 x 30 mm (φ6.35 x 30 mm)
• Rating: 250 V-7A (50 V MAX.)
• Insulation Resistance: DC500V, 100 MΩ or more
• Voltage Resistance: AC2000V (1 minute)
• Protection Grade: IP66 (1 minute)
• Main Insulation Material: Polycarbonate (UL94 V-2)
• Terminal Metal Fittings: Soldering Terminal (Hand soldering conditions: tip temperature 390±10°C, tip time 5±1 seconds, 2 times)
• Body Color: C (Transparent)
• Connected Wire: 0.75 mm2 or less, Finish Outer Diameter 1.5 mm -2.8 mm (Cut the grommet to match the outer diameter of the wire)
• Relay Type
• Dust and Waterproofing (IP66)
• RoHS Compatible
• ※ Do not open the cap of the f holder in the presence of voltage beca of the risk of electric shock. *Do not deform the clip, as contact with the f may become unstable, causing abnormal heat generation and ignition. *Soldering work should be carried out in such a way that the flux does not adhere to the inside of the clip which is the contact part with the f tube. If it sticks, wipe off the flux with alcohol. *Install the f tube and insert the f clip after the product has cooled sufficiently after soldering. *It cannot be d in water. *Dep ing on the operating conditions, water may enter. Please check thoroughly before . *Do not in places exposed to direct sunlight or outdoors. *Condensation may occur internally due to changes in ambient temperature. Remove condensation or the product in a place where there is little change in ambient temperature. *Dep ing on the type of solvent or oil, the product may crack or dissolve. *When you run the wire through the grommet, press the grommet and run it through.