产品详细内容
产品型号: 61-4678-11
产品品牌: A&D
功能
- [Applications]
- ・ Measurement of viscosity required for correction of particle size distribution • Viscosity control of resist solutions, inks, paints, and adhesives • Viscosity control of abrasives for semiconductors, ceramic materials, blood, etc. • Curing process of polymers, solder fluxes, proteins, etc. • Measurement of gelling point of non-ionic surfactants • Measurement of viscosity change due to temperature change of lubricating oils, engine oils, foods, and beverages • [Features]
- Simple handy type that can be d anywhere. Ink viscosity and paint viscosity are also measured in the field
- Carrying case standard (Stand, software, container, etc. are not included.)
- Tuning fork vibration type achieves 1% high precision repeatability in full range. Viscosity calibration is possible using a viscosity standard solution.
- Wide measurement range.
- Selectable measurement range: A wide range of continuous measurements from low to high viscosity can be performed without changing the vibrator.
- Viscosity measurement in real time.
- Continuous measurement for a long time.
- Accurate and quick temperature detection.
- Titanium Vibrator
- RS-232C Standard Installation (D-Sub25P Female)
规格
- 测量方法:SV型 (音叉振动法) /固定振动30Hz
- 测量粘度范围:0.3-1,000mPa·s
- 测量精度:测量精度:1% (全范围) 设定 :20 -30°C,无冷凝*校准用标准溶液,换能器重复测量时重复测量 (标准偏差) 保持在同一液体中使用支架设置时
- 小样品体积:2ml
- 温度测量部分:0 -160°C/0.1°C显示器
- 外部尺寸:感测器单元部分112 (W) x 132 (D) x 291 (H) mm,显示部分238 (W) x 132 (D) x 170 (H) mm
- 重量:感测器装置 (约。0.8公斤) ,显示器部分约1.3公斤
- 电源:AC整流器 (标准)
- 标准配件:说明手册、AC整流器、连接线 (1卷) 、携带包
相关产品推荐
您可能还对以下产品感兴趣
65-3530-89 Tape Type Multi-Purpose Temperature Sensor ST Series -50~210°C 2 sec Flat 100 mm E Type ST-21E-010-TS1-ANP
型号: 65-3530-89
品牌: ANRITSU METER CO., LTD.
63-7865-33 Standard sensor for residual chlorine meter FTCS-01PE
型号: 63-7865-33
品牌: CUSTOM corporation
63-7864-99 pH Sensor for Hydrofluoric Acid Resistance PHS-11PE
型号: 63-7864-99
品牌: CUSTOM corporation