产品详细内容
产品型号: 2-7856-21-20
产品品牌: AS ONE Corporation
功能
- Calibrating temperature sensor.
- Natural Convection/Forced Convection Switching Type 1/2 Functions
- Natural Convection/Forced Convection can be switched with the switch shutter.
- The 3-stage PID control provides low overshoot temperature rise.
- A timer for specifying the day of the week and time and a 16 step 8 pattern program function are provided as standard.
- In addition to the PV/SV two-stage display that makes it easy to check the measured values and the set values, the over-temperature rise prevention set temperature display is adopted.
- If an error occurs, an output of 100 VAC 1 A can be output.
- A PID control type temperature controller equipped with a temperature gradient variable program function of up to 16 steps and 8 patterns is adopted.
- You can check the current temperature even from a distance, display the graph (zoom), and start/stop recording.
- Using Bluetooth(R) communication, you can check the current temperature, display a graph, start/stop recording, and transfer to a PC (CSV format) from your iPhone terminal.
- You can use the iPhone app intuitively without a manual.
规格
- Calibration Certificate
- Internal dimensions (mm): 300 x 300 x 300
- Temperature setting range (deg. C): room temperature + 20 ~ 240
- Convection system: Natural convection/forced convection switching system
- Temperature control system: 3-stage PID control/SSR output
- Functions: Timer function and program function
- Safety device: Overcurrent breaker, independent overrise prevention function, burnout mechanism (heater OFF when sensor is disconnected)
- Storage capacity: 27 L
- Material: Exterior/Steel Melamine Baked Coating, Interior/Stainless Steel (SUS 304)
- External dimensions: 455 x 440 x 650 mm
- Weight: approximately 30 kg
- Power supply: 100 VAC 50/60 Hz 11.5 A (3 P plug)
- Accessories: 2 sets of shelf rails and shelves (load capacity: 15 kg)
- *Do not put combustible materials in the cabinet.
- *This product is a general calibration. A Calibration Certificate (Calibration Certificate, inspection report and traceability system diagram) is attached.
- *The Calibration Certificate is in Japanese.
- *The standard calibration point is 100 degrees Celsius. If you would like additional points, please contact us.
- *"Calibration Certificate" products are Azwan's original service in which measuring instruments are calibrated at the time of shipment by Azwan or Azwan's subcontractors and a Calibration Certificate is issued.
相关产品推荐
您可能还对以下产品感兴趣
实验室仪器
实验室仪器
实验室仪器
实验室仪器