产品详细内容
产品型号: 1-7473-41-20
产品品牌: AS ONE Corporation
功能
- Calibrating temperature sensor.
- A new line of types with a calibration certificate
- An independent excessive rise prevention device capable of digitally setting the set temperature has been installed as standard, giving further consideration to safety.
- Uses a highly visible color LCD display for improved operability.
- In addition to the PV/SV two-stage display that makes it easy to check the measured values and the set values, the over-temperature rise prevention set temperature display is adopted.
- Four timer functions (ON, OFF, ON/OFF, SV start) are provided as standard equipment, and you can choose from four types according to the quantity and size of the sample.
- The air jacket type natural convection system provides a uniform and stable temperature environment and prevents the sample from drying out.
- You can observe the sample without opening the double door type inner door with transparent inner door.
- The temperature control uses PID control, which enables stable temperature control with high accuracy.
- A security key is included.
规格
- Calibration Certificate
- Storage capacity (L): 27
- External dimensions (mm): 400 x 410 x 685
- Interior dimensions (mm): 300 x 300 x 300
- Convection system: Natural convection air jacket
- Temperature control range: room temperature + 5 ~ 80 degrees C
- Time to reach 37 degrees: About 20 minutes
- Temperature distribution (JTM K05): +/- 0.6 degrees C (at 37 degrees C)
- Temperature variation (JIS): +/- 0.6 degrees C (at 37 degrees C)
- Temperature Gradient (JIS): 2.0 degrees C (at 37 degrees C)
- Temperature control system: PID control, SSR output
- Additional functions: ON Timer, OFF Timer, SV start, ON/OFF Timer
- Safety device
- Independent overtemperature protection device (operating temperature can be set digitally)
- Overcurrent breaker
- Burnout mechanism (heater OFF when sensor is disconnected)
- Heater capacity: 200 W
- Temperature Sensor: Platinum temperature resistor Pt 100 ohm
- Overrise prevention sensor: K thermocouple
- Shelf Pitch/Number of Racks: 35 mm Pitch/7 Racks
- Exterior/Interior: Steel powder coating/Stainless steel (SUS 304)
- Inner door material: Tempered glass
- Vent: phi 32 mm x 1
- Weight: approximately 30 kg
- Power Supply: 100 VAC 50/60 Hz Cord Length 2 m 3 P Plug
- Shelf load capacity: 15 kg
- Accessories: 2 shelf boards, 2 shelf rails
- This product is compatible with the Validation Service (IQ/OQ). Please contact us.
- *Validation service is a service where installation qualification (IQ) and operational performance qualification (OQ) are performed and inspection documents are submitted at the customer's site.
- *This product is a general calibration. A Calibration Certificate (Calibration Certificate, inspection report and traceability system diagram) is attached.
- *I'm calibrating the Temperature Sensor.
- *The standard calibration point is 100 degrees Celsius. If you would like additional points, please contact us separately.
- *The Calibration Certificate is in Japanese.
- *"With Calibration Certificate" is an original service of Azwan that calibrates measuring instruments at the time of shipment by Azwan or Azwan subcontractors and issues a Calibration Certificate.
相关产品推荐
您可能还对以下产品感兴趣
实验室仪器
65-8685-69 Introduction Funnel (Cyan Distiller) 2001-1535
型号: 65-8685-69
品牌: NIPPON RIKAGAKU KIKAI
实验室仪器
实验室仪器
实验室仪器