产品详细内容
产品型号: 64-5278-71
产品品牌: Mitutoyo Corporation
功能
- Small surface roughness measuring instrument that combines various measurement and analysis functions and ease of use with excellent portability
- 7.5 inch color graphic LCD equipped with large screen and highly visible touch panel
- Drive unit and detector with a wide variety of variations to suit the measurement occasion
- Parameter recalculation and measurement results stored on the memory card in text format and loaded to a PC or USB communication with the PC. Using special software, measurement control can be changed and inspection results can be issued
- The screen can be switched between icon display and text display, and the detailed explanation of buttons can be displayed with a guidance function
- Since measurement data can be partially deleted, defects that are not to be included in the parameter calculation can be deleted and specified and calculated
- Color display of pass/fail judgment results by setting tolerances beforehand
- Display of calculation results can be selected
- After measurement, Can be easily recalculated by changing the evaluation condition
- 2 curves simultaneous evaluation function
- Stylus alarm function
- [Cautionary note]
- Parameter Rmax can be calculated only when VDA standard is selected or ANSI standard or JIS'82 standard is selected
- Parameter Rz1max can be calculated only when ISO'97 standard is selected
- Parameter RzjiS can be calculated only when JIS'01 standard is selected
- Parameter tp and Htp can be calculated only ANSI standard
- Cutoff value s is disabled when JIS'82 standard is selected
- The pass/fail judgment function can only be set to the average value rule for ANSI standard and 16% rule for VDA standard is not selectable
- Auto sleep function is disabled when AC adapter is used and auto sleeve selection can be turned OFF
- Connection cable/12AAW066 for connection of operation display part and drive part
规格
- X轴测量范围:16 mm
- 检测器测量范围:360 (-200至+160μm)
- 检测器测量范围/分辨率:360μm/0.02μm、100μm/0.006μm、25μm/0.002μm
- 测量速度:0.25、0.5、0.75 mm/s
- 返回时测量速度:1mm/s
- 测量力/笔尖形状:4 mN/5μmR 90°
- 兼容标准:JIS ‘82 JIS ’ 94、JIS ‘01、ISO ’ 97、ANSI、VDS
- 评价曲线:横截面曲线、粗糙度曲线、DF曲线、粗糙度和主曲线、波浪度和主曲线
- 滑压:400 mN或更小
- 参数:Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv,R3z, Rsk, Rku, Rc, RPc, Rsm,Rz1max, S, HSC, RzJIS, Rppi, R△a, R△q, Rlr, Rmr, Rmr (c) ，Rδc, Rk, Rpk, Rvk, Mr1,M2,A1,A2, Vo, In a, q, lo, Rpm, tp, HTP, R, Rx, AR, W, Wx, Wte可自定义
- 分析电刷:负载曲线，振幅分布曲线
- 过滤器:Gauussian, 2CR 75, PC 75
- c截止值:0.08、0.25、0.8、2.5、8 mm
- 截止值:2.5、8μm
- 标准长度:0.08、0.25、0.8、2.5、8 mm
- 节数:X1、X2、X3、X4、X5、X6、X7、X8、X9、X10、任意 (间隔0.3~16.0 mm/0.01 mm)
- 液晶尺寸 (mm) :117.8 x 88.2
- 显示语言:16种语言(日本、英国、德国、法国、意大利、西班牙、葡萄牙、韩国、 (简体繁体)、捷克共和国、波兰、匈牙利、土耳其、瑞典、荷兰)
- 操作结果显示:1级显示/1个参数的操作结果显示，4级显示/4个参数的诬告结果显示垂直4级，波形显示/1个参数的操作结果和评价曲线显示垂直，跟踪显示/显示同一参数的 后10个操作结果
- 打印功能:测量条件，计算结果，合格/不合格判断结果，每个部分的计算结果，公差值，评估曲线，显示曲线，负载曲线，幅度分布曲线， 设置项目
- 外部输入/输出功能:USB I/F,数字输出，RS -232 C I/F,脚开关I/F
- 自定义程序:允许 选择要显示和操作的参数
- 通过/失败决策函数: 大值规则，16%规则，平均值规则，标准差(1δ，2δ，3δ)
- 测量条件的节省:电源关闭时条件的节省
- 存储功能:内置存储器/测量条件10、存储卡 (可选) /测量条件500、测量数据1万、屏幕数据500、文本数据1万、统计数据500、设备设置状态备份1、跟踪10数据存储10
- 校准:数字输入的自动校准方法/多次测量的平均校准方法 ( 多12次)
- 省电功能:自动睡眠 (30到600秒可选) 功能
- 电源:集成电池 (镍氢充电电池) ，交流适配器2电源
- 内置电池充电时间:约。4小时(根据 温度会有变化。)
- 可测量时间 (当内部电池充满电时) :约。1500次(可根据使用条件、 等而变化。)
- 尺寸:275 x 109 x 198 mm (算术显示单元) 和115 x 23 x 26.7 mm (未安装驱动单元和检测器) 。
- 体重:约1.8公斤(算术显示单元，驱动单元和标准检测器)
- 附件:连接线/12 AAW066、粗糙度标准件/178 -601、AC适配器/357651、电源线/02ZAAA000、平鼻件/12 AAA 217、圆筒鼻件/12 AAA 218、支撑脚设置/12 AAA 216、校准支架/12 BAK 700、触控笔/12 BAG 834、保护片/12 BAL 402、记录纸 (包括5卷) /270732、搬运护具/12 BAL 400、加载器、触控笔背带、操作手册、单张手册、保修
相关产品推荐
您可能还对以下产品感兴趣
理化检测
理化检测
理化检测
69-3943-36 φ60 Pressure Meter Pressure Meter with Glycerin GV50 G1/4B B Frame GV50-223-0.1-0.1MPA
型号: 69-3943-36
品牌: NAGANO KEIKI Co., Ltd.
理化检测
1-6511-11-56 Daily Waterproof pH Meter with English Calibration Certificate pHep4
型号: 1-6511-11-56
品牌: Hanna Instruments