64-4058-36 耐热性文档集 (4件组) 热击热指数计 (符合JIS) SK-170GT
理化检测

64-4058-36 耐热性文档集 (4件组) 热击热指数计 (符合JIS) SK-170GT

型号: 64-4058-36
品牌: Sato Keiryoki Mfg. Co., Ltd.
分类: 理化检测

产品描述

产品型号: 64-4058-36产品品牌: Sato Keiryoki Mfg. Co., Ltd. 功能 T […]

联系我们

咨询热线

18866622123

微信咨询

微信号: ahyhk8

微信二维码

产品详细内容

产品型号: 64-4058-36
产品品牌: Sato Keiryoki Mfg. Co., Ltd.

功能

  • This product is a heat exhaustion heat index meter with a set of tresability documents (4-piece set of calibration transcript, calibration certificate, system chart, and reference instrument transcript) attached.
  • Calibration Standard Point Temperature 23°C (Not Black Ball Temperature) Humidity 60% (at23°C)
  • Handy type measuring instrument with integrated Black Ball Thermometer, Thermometer and Hygrometer, which can be used as a guideline for preventing heat stroke and as an evaluation of heat stress in the working environment to measure WBGT index.
  • Use this product to prevent heatstroke by observing the wind chill (heat).
  • The unit complies with JIS B 7922 Class 2 for physical education, club activities, extracurricular activities, indoor and outdoor sports events, work sites in high temperature environments, roads, maintenance work, and agricultural work.
  • When the setting value with alarm alarm (any WBGT index) is reached, it is announced by buzzer.
  • With HOLD function. It also has a function to display the highest value (MAX) and lowest value (MIN).
  • WBGT index measurement environment setting and auto power off (about 20 minutes) function are included.
  • Comes with a hard case that is convenient to carry and store
  • Standard sticker The WBGT index guideline for preventing heatstroke is used as a standard sticker. Select one of three types ((1) Japan Sports Association (2) the Ministry of Health, Labour and Welfare (3) Japan Industrial Hygiene Society) depending on the use, and attach it to the front of the unit (lower part of the key).
  • There is also a separate tripod that can be installed at a height similar to that of a human. (Optional) No. 8310-80 M45
  • To prevent the measurement temperature from being affected by radiation heat, measure the temperature in an area where there is nothing nearby.
  • It is possible to install "Radiation Protection Parts (Option No. 8310-20)" to protect the temperature and humidity detection part and the main body case part from the radiant heat of the heat source.

规格

  • 主体规范
  • 测量范围
  • 温度: (TA) 0.0°C~50.0°C
  • 黑球温度: (TG) 0.0°C~80.0°C
  • 温湿度指数:0.0°C~50.0°C,湿度10.0%~95.0%
  • 测量精度
  • 温度: (TA) ±0.6°C
  • 黑球温度: (TG) ±1.2°C (20~60°C) ±2.0°C (左柱除外)
  • WBGT指数:±2°C,湿度 (RH) :±3% rh (30~90% rh,温度20~40°C)±5% rh (注意事项除外)
  • 分辨率温度,黑球温度,WBGT指数:0.1°C,湿度0.1% rh
  • 采样:大约2秒
  • WBGT索引告警配置范围:20.0到49.9在0.1°C
  • 风速设定范围:0.1~3.0 m/s (0.1 m/s) *本机无法测量风速。
  • 实时通信:RS -232 C通信 (需要选配电缆)
  • 功能:WBGT指数室内外开关,自动断电功能 (约20分钟) 可取消/MAX ( 高值) ,MIN ( 低值) /HOLD功能
  • 使用 条件:0~50°C, 95% rh或更低储存温度:-10~50°C (不冷凝)
  • 电源:1x9V电池
  • 电池寿命:约。连续使用600小时 (无报警)
  • 维度
  • 机身: (W) 71 x (H) 275 x (D) 30 mm
  • 黑球:φ60 mm
  • 重量:约。240 g (含电池)
  • 附件手册一本 (质量保证书) ,9V电池,一块硬壳,中暑指数指南贴纸 (3种)