规格

• Motor control board mounted with pin header
• The TB6612FNG is a motor driver IC that can control up to 2 DC motors at a constant current of 1.2 A (peak 3.2 A). Two input signals (IN1, IN2) can be d to control the motor in four modes: forward turn/reverse turn/brake/stop. The two motor outputs (A, B) can be independently controlled and the speed of each motor can be controlled via a PWM signal of up to 100 kHz. To resume the motor from standby mode, set the STBY pin to High. Pin headers are implemented and ready to .
• The logic supply voltage (VCC) is 2.7~5.5 V and the motor power supply (VM) is up to 15 V. The output current is rated at a maximum of 1.2 A per channel (3.2 A maximum for a single pulse).
• A decoupling capacitor is in the power line. All pins of the TB6612FNG are assigned to the pitch header, and the input and output pins are arranged in one direction.
• Get Started With the Motor Driver Hookup Guide
• Specifications
• Supply Voltage: 15 V (max) (VM), 2.7~5.5 V (VCC)
• Output current: 1.2 A (average), 3.2 A (peak)
• Standby control for power saving
• Forward rotation/reverse rotation/short brake/motor control stop mode
• Built-in thermal shutdown circuit and low voltage detection circuit
• Insert decoupling capacitor in power supply line
• Pin header implemented
• [Reference]
• Schematic
• Eagle Files
• Hookup Guide
• Datasheet (TB6612FNG)
• GitHub (v1.1c)