日本三木联轴器SFC-060SA2-15B-15B SFC-□SA2 Types [Specifications] Model Type Rated torque [N･m] Misalignment Max. rotation speed [min-1] Torsional stiffness [N･m/rad] Axial stiffness [N/mm] Moment of inertia [kg･m2] Mass[kg] Parallel［mm］ Angular［゜］ Axial［mm］ SFC-002SA2 C 0.25 0.01 0.5 ±0.04 10000 190 34 0.06×10-6 0.003 SFC-005SA2 C 0.6 0.02 0.5 ±0.05 10000 500 140 0.26×10-6 0.007 SFC-010SA2 C 1 0.02 1 ±0.1 10000 1400 140 0.58×10-6 0.011 SFC-020SA2 C 2 0.02 1 ±0.15 10000 3700 64 2.39×10-6 0.025 SFC-025SA2 C 4 0.02 1 ±0.19 10000 5600 60 3.67×10-6 0.029 SFC-030SA2 A 5 0.02 1 ±0.2 10000 8000 64 4.07×10-6 0.034 B 6.09×10-6 0.041 C 8.20×10-6 0.049 SFC-035SA2 C 10 0.02 1 ±0.25 10000 18000 112 18.44×10-6 0.082 SFC-040SA2 A 12 0.02 1 ±0.3 10000 20000 80 16.71×10-6 0.077 B 22.55×10-6 0.085 C 29.25×10-6 0.100 SFC-050SA2 A 25 0.02 1 ±0.4 10000 32000 48 55.71×10-6 0.159 B 76.26×10-6 0.177 C 99.03×10-6 0.206 SFC-055SA2 C 40 0.02 1 ±0.42 10000 50000 43 188.0×10-6 0.314 SFC-060SA2 A 60 0.02 1 ±0.45 10000 70000 76.4 145.9×10-6 0.283 B 205.0×10-6 0.326 C 268.6×10-6 0.385 SFC-080SA2 C 100 0.02 1 ±0.55 10000 140000 128 710.6×10-6 0.708 SFC-090SA2 C 180 0.02 1 ±0.65 10000 100000 108 1236×10-6 0.946 SFC-100SA2 C 250 0.02 1 ±0.74 10000 120000 111 1891×10-6 1.202 * Types A / B / C are automatically specified by Miki Pulley according to the combination of bore diameters you select, and cannot be specified by the customer. * Check the Standard Bore Diameter list as rated torque may be restricted by the holding power of the shaft connection component. * Max. rotation speed does not take into account dynamic balance. * Torsional stiffness values given are measured values for the element alone. * The moment of inertia and mass are measured for the maximum bore diameter. [Dimensions]