日本OPTEX奥普士激光传感器ZR-L1000CP Amplifier Built-in TypeZ-L Series DOWNLOAD IIndustry standard sized laser sensors with built-in amplifiers Same low cost as LED light source types Laser class 1 for through-beam type Outstanding environmental resistance Feature Applications Lineup/Specifications Characteristic curves Options Circuit diagram/Dimensions Lineup Type Shape Sensing distance (Adjustable distance range shown in parentheses) Light source Model (Models in parentheses are connector types) NPN type PNP type Laser Through-beam Class 1 laser ZT-L3000N (ZT-L3000CN) ZT-L3000P (ZT-L3000CP) Laser Retro-reflective Class 2 laser ZR-L1000N (ZR-L1000CN) ZR-L1000P (ZR-L1000CP) Laser Diffuse-reflective Class 2 laser ZD-L40N (ZD-L40CN) ZD-L40P (ZD-L40CP) Laser BGS Class 1 laser BGS-ZL10N (BGS-ZL10CN) BGS-ZL10P (BGS-ZL10CP) BGS-ZL30N (BGS-ZL30CN) BGS-ZL30P (BGS-ZL30CP) •For the connector type, please purchase an optional JCN series connector cable. Specifications Type Through-beam type Retro-reflective type Diffuse-reflective type Model NPN Cable type ZT-L3000N ZR-L1000N ZD-L40N Connector type ZT-L3000CN ZR-L1000CN ZD-L40CN PNP Cable type ZT-L3000P ZR-L1000P ZD-L40P Connector type ZT-L3000CP ZR-L1000CP ZD-L40CP Sensing distance 30 m 0.2 to 10 m*1 400 mm*2 Light source Red semiconductor laser Class 1 (IEC/JIS) *3 Wavelength: 650 nm, Maximum output: 390 μW Red semiconductor laser Class 2 (IEC/JIS) *3 Wavelength: 650 nm, Maximum output: 3 mW Spot size (at focal distance) Approx. ø2 mm*4 Distance: 2 m (at ordinal temperatures) Approx. ø2.5 mm*4 Distance: 2 m (at ordinal temperatures) Approx. ø2 mm*4 Distance: 400 mm (at ordinal temperatures) Response time 250 μs or less Hysteresis - 20% Distance adjustment 1-turn potentiometer Indicators Output indicator (orange LED), Laser emission indicator (green LED: stability indicator for through-beam type receiver) Control output NPN/PNP type Open collector Max. 100 mA/30 VDC Output mode Light ON / Dark ON selection switch Connection type Cable type: Cable length: 2 m ø3.8 mm / Connector type: M8, 4-pin Rating Supply voltage 10 to 30 VDC, including 10% ripple (p-p) Current consumption Emitter: 15 mA or less Receiver: 15 mA or less 20 mA or less Applicable regulations EMC directive (2004/108/EC) / FDA regulations (21 CFR 1040.10) Applicable standards EN 60947-5-2 standards Noise resistance: Feilen Level 3 cleared Environmental resistance Ambient temperature/humidity -10 to +50℃ (no freezing) / 35 to 85% RH (no condensation) Ambient illuminance Sunlight: 10,000 lx/Incandescent lamp: 3,000 lx Vibration resistance 10 to 55 Hz; double amplitude 1.5 mm; 2 hours in each of the X, Y, and Z directions Shock resistance Approx. 50 G (500 m/s2); 3 times in each of the X, Y, and Z directions Degree of protection IP67 Material Housing: ABS (glassfiber reinforced), Front cover: PMMA Weight without cable Approx. 20 g Approx. 10 g Included accessories Mounting bracket: BEF-W100-B*5 Mounting bracket: BEF-W100-B*5 Reflector: P250F Mounting bracket: BEF-W100-B*5 *1. With P250F reflector *2. 100 mm 100 mm white paper *3. Classified as class II in the US FDA standards *4. Defined with center strength 1/e2 (13.5%). There may be light leakage outside of the specified spot size. The sensor may be affected when there is a highly reflective object close to the target area. *5. Mounting bracket BEF-W100-A is included with the connector type. • Specifications are subject to change without prior notice for product improvement purposes.