MJ100/MJ110 Product TOP Specifications Dimensions Instruction manual Catalog Product TOP High response speed interpolator unit for position control Capable of 40 to 1000 divisions Produces AB quadrature signals with a resolution from 2 μm to 125 μm, when used in combination with the optionally available DigirulerR PL25 head unit and the SL110/130 scale unit (scale signal wavelength: 5 mm), or with the PL60 and the SL331 scale unit (scale signal wavelength: 2 mm). MJ100: Supply voltage 5 V input, Line driver (EIA-422 compliance) output MJ110: Supply voltage 12 to 30 V input, Open collector (lOL=50 mA maximum) output MJ100 also generates U/ V/ W phase output with a period of reproduced DigirulerR signal (5 mm with PL25; 2 mm with PL60) System Configuration Diagram Specifications Specifications *1 These valuse for a minimum phase difference of 1 μs may vary depending on the output cable length. *2 The alarm function may not operate when an abnormal offset is generated due to a broken wire, etc Magnescale reserves the right to change product specifications without prior notice. Model MJ100 MJ110 Power supplyPower supply voltage DC5 V (4.5 V to 6 V) DC12 V to 30 V (11 V to 31 V) Power consumption 4W 3W Output interface Line driver (EIA-422 compliance) NPN open collector(IOL=50mA max.) Output AB quadrature・Z phase・UVW phases・Alarm AB quadrature・Z phase・Alarm Number of divisions 1000, 960, 800, 512, 500, 480, 400, 256, 240, 200, 128, 120, 100, 80, 64, 40 and 1/2 of each of these (which does not satisfy the synchronized reference point specifications.) Maximum response speed 1000 divisions 6 kHz:when connected to PL25 1800 m/min when connected to PL60 720 m/min 600 Hz:when connected to PL25 180 m/min when connected to PL60 72 m/min*1 500 divisions 15kHz:when connected to PL25 4500m/min when connected to PL60 1800m/min 1.5 kHz:when connected to PL25 450 m/min when connected to PL60 180 m/min*1 200divisions 42kHz:when connected to PL25 12600 m/min when connected to PL60 5000 m/min 4.2 kHz:when connected to PL25 1260 m/min when connected to PL60 500 m/min*1 120 divisions 70 kHz:when connected to PL25 21000m/min when connected to PL60 8400 m/min 7.4 kHz:when connected to PL25 2220m/min when connected to PL60 888 m/min*1 Phase difference 100 ns 1 μs Alarm*2 Speed alarm (minimum phase difference time or maximum response frequency); Level alarm (0.4 Vp-p or less); Minimum alarm time: approximately 400 ms System startup time Within 0.5 seconds after the power comes on line Compatible head unit PL25 or PL60 Operating temperature 0°C to 45°C Storage temperature -20°C to 60°C Dimensions 138×93×26 (mm) ncluding protrusions Mass 350 g Accessories Manual・Output connector・connector cap・mounting screws・Ferrite core Option SET-P16-1 (for external reference point) Scale extension cable, external reference point extension cable, Output connector with cable