日本MIKI PULLEY三木普利电磁离合器546-15-34-NF-20DIN-DC24V 546 Models Specifications 546 Models 546 Models [Specifications] Model Size Torque ［N・m］ Coil (at 20℃) Heat resistance class Allowable rotation speed of engagement [min-1] Max. rotation speed ［min-1］ Moment of inertia J ［kg・m2］ Number of teeth Armature pull-in time ta [s] Armature release time tar [s] Bearing number Mass ［kg］ Excitation voltage ［V］ Wattage ［W］ Current ［A］ Resistance ［Ω］ NF NS Sawtooth Rotor Armature Full-depth tooth, full Sawtooth, full 546-12-34 12 17.5 DC24 13.3 0.55 43.4 F 50 30 100 1500 6.6×10-5 6.0×10-5 200 25 0.035 0.040 6004 0.5 546-13-34 13 25 DC24 18.7 0.78 31.0 F 50 30 100 1500 1.5×10-4 1.2×10-4 220 30 0.040 0.050 6005 0.9 546-15-34 15 50 DC24 21.3 0.89 27.1 F 50 30 100 1500 3.7×10-4 3.7×10-4 260 36 0.060 0.060 6007 1.5 546-21-34 21 100 DC24 27.0 1.13 21.0 F 50 30 100 1500 8.7×10-4 5.2×10-4 290 36 0.080 0.070 6009 2.4 546-23-34 23 250 DC24 36.3 1.51 15.9 F 50 30 100 1500 2.06×10-3 1.85×10-3 280 38 0.090 0.080 6011 3.9 546-25-34 25 500 DC24 56.6 2.36 10.2 F 50 30 100 1500 4.88×10-3 4.51×10-3 250 40 0.100 0.090 6014 6.8 546-31-34 31 1000 DC24 79.7 3.32 7.2 F 50 30 100 1500 1.12×10-2 1.28×10-2 195 40 0.110 0.110 6017 11.1 546-32-34 32 2200 DC24 114.1 4.75 5.1 F 50 30 100 1500 2.87×10-2 2.92×10-2 186 40 0.120 0.130 6020 15.3 *The armature pull-in and release times are reference values under no load in a stationary state. They are generally longer depending on the size of the load and the operating state when engaged. *The allowable rotation speeds of engagement NF and NS indicate, respectively, full-depth tooth/full position and full-depth tooth/single position. [Dimensions]   Unit ［mm］ Model Radial direction dimensions Axial direction dimensions A B C D E F G e f g H K L M N O P S U V W a 546-12-34 57 52 22.5 26 27.2 36 20 M4 8.5 － 10 43 34 4.3 3.1 1.3 1.3 2.0 15 4.5 5 0.2 546-13-34 67 58 31 32 33.7 46 25 M5 8.5 4.5 11 49 39 4.9 3.5 1.4 1.3 2.5 16.5 5 6 0.3 546-15-34 82 75 36.5 42 44.5 60 35 M6 10 4.5 12 55 42 6.1 4.8 2.2 1.9 3.5 18 6 8 0.3 546-21-34 95 88 46 52 55 70 45 M8 12 5.5 14 63 45 8.7 6.0 2.8 2.2 3.0 20 6 10 0.4 546-23-34 114 105 55 62 65 80 55 M8 12 7.8 18 69 50 9.0 6.5 3.3 2.2 3.0 24 6 10 0.4 546-25-34 134 127 68 72 75 95 70 M12 15 9.5 20 83 61 11.0 8.4 4.3 2.7 3.0 26 8 10 0.4 546-31-34 166 152 80 90 93.5 120 85 M12 15 9.5 22 93.5 66 13.1 11.4 5.3 3.2 3.5 31 10 12 0.5 546-32-34 195 175 95 100 103.5 150 100 M12 19 11.5 24 110 80 14.0 11.7 6.3 3.2 4.0 38.5 10 12 0.5 Unit ［mm］ Size Shaft bore dimensions d H7 Models compliant with JIS standards Models compliant with the old JIS standards b P9 t+0.50 b E9 t+0.50 12 10 3-0.006-0.031 1.2 4+0.05+0.02 1.5 13 15 5-0.012-0.042 2 5+0.05+0.02 2 15 20 6-0.012-0.042 2.5 5+0.05+0.02 2 25 8-0.015-0.051 3 7+0.061+0.025 3 21 25 8-0.015-0.051 3 7+0.061+0.025 3 30 8-0.015-0.051 3 7+0.061+0.025 3 23 30 8-0.015-0.051 3 7+0.061+0.025 3 40 12-0.018-0.061 3 10+0.061+0.025 3.5 25 40 12-0.018-0.061 3 10+0.061+0.025 3.5 50 14-0.018-0.061 3.5 12+0.075+0.032 3.5 31 50 14-0.018-0.061 3.5 12+0.075+0.032 3.5 60 18-0.018-0.061 4 15+0.075+0.032 5 32 60 18-0.018-0.061 4 15+0.075+0.032 5 70 20-0.022-0.074 4.5 18+0.075+0.032 6