日本三木MIKIPULLEY制动器ETP-A-32-B ETP-A Models [Specifications] Model Rated torque ［N・m］ Rated thrust ［N］ Rated radial load ［N］ Shaft contact pressure ［N/mm2］ Hub contact pressure ［N/mm2］ Tightening torque［N・m］ Moment of inertia ［kg・m2］ Mass ［kg］ ETP-A-15 55 7300 2500 90 80 6 0.018 × 10-3 0.1 ETP-A-19 100 10600 5800 90 80 8 0.046 × 10-3 0.17 ETP-A-20 125 12500 6600 90 80 8 0.046 × 10-3 0.16 ETP-A-22 135 12300 8200 90 80 8 0.065 × 10-3 0.19 ETP-A-24 200 16700 9800 90 80 8 0.067 × 10-3 0.2 ETP-A-25 250 20000 10600 90 80 8 0.071 × 10-3 0.19 ETP-A-28 300 21400 13100 90 80 8 0.12 × 10-3 0.26 ETP-A-30 420 28000 14700 90 80 8 0.14 × 10-3 0.29 ETP-A-32 420 26300 16300 90 80 8 0.20 × 10-3 0.35 ETP-A-35 650 37100 18800 90 80 8 0.25 × 10-3 0.4 ETP-A-38 750 39500 21200 90 80 8 0.31 × 10-3 0.43 ETP-A-40 940 47000 22800 90 80 8 0.44 × 10-3 0.55 ETP-A-42 940 44800 24400 90 80 8 0.47 × 10-3 0.55 ETP-A-45 1290 57300 26900 90 80 13 0.69 × 10-3 0.71 ETP-A-48 1570 65400 29300 90 80 13 0.83 × 10-3 0.78 ETP-A-50 1900 76000 30900 90 80 13 1.05 × 10-3 0.86 ETP-A-55 2500 90900 35000 90 80 13 1.43 × 10-3 1.06 ETP-A-60 3400 113000 39100 90 80 13 2.15 × 10-3 1.37 ETP-A-65 3500 108000 43100 90 80 13 3.10 × 10-3 1.67 ETP-A-70 5200 149000 47200 90 80 32 4.08 × 10-3 2.04 ETP-A-75 6300 168000 51300 90 80 32 5.50 × 10-3 2.42 ETP-A-80 8800 220000 55000 90 80 32 8.10 × 10-3 2.64 ETP-A-90 11000 244000 60000 90 80 32 12.2 × 10-3 3.54 ETP-A-100 15500 310000 62000 90 80 32 19.9 × 10-3 4.8 *The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero. *The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20°C. *ETP-A-75, 80, 90, and 100 are made to order. [Dimensions]   Unit ［mm］ Model d D D1 L L1 L2 L3 L4 M ETP-A-15 15 23 37.5 17 28 33 5 5.4 3-M5×10 ETP-A-19 19 28 45 21 34 39 5.5 6.9 3-M5×12 ETP-A-20 20 28 45 22 35 40 5.5 6.4 3-M5×12 ETP-A-22 22 32 49 22 35 40 5.5 6.4 4-M5×12 ETP-A-24 24 34 49 25 38 43 5.5 6.4 4-M5×12 ETP-A-25 25 34 49 27 41 46 5.5 6.9 4-M5×12 ETP-A-28 28 39 55 29 43 48 5.5 6.9 4-M5×12 ETP-A-30 30 41 57 32 46 51 5.5 6.9 4-M5×12 ETP-A-32 32 43 60 34 50 55 7 7.4 4-M5×14 ETP-A-35 35 47 62.5 37 53 58 7 7.4 6-M5×14 ETP-A-38 38 50 65 41 57 62 7 7.4 6-M5×14 ETP-A-40 40 53 70 43 60 65 7.5 8.4 6-M5×16 ETP-A-42 42 55 70 45 62 67 7.5 8.4 6-M5×16 ETP-A-45 45 59 77 49 66 72 8 8.4 6-M6×16 ETP-A-48 48 62 80 52 70 76 8 8.4 6-M6×16 ETP-A-50 50 65 83 53 72 78 8.5 9.4 6-M6×18 ETP-A-55 55 71 88 58 77 83 9 9.4 8-M6×18 ETP-A-60 60 77 95 64 85 91 10 10.4 8-M6×20 ETP-A-65 65 84 102 68 90 96 9.5 10.9 8-M6×20 ETP-A-70 70 90 113 72 94 102 9.5 10.9 6-M8×20 ETP-A-75 75 95 118 85 108 116 11 11 6-M8×22 ETP-A-80 80 100 123 90 114 122 11 11 6-M8×22 ETP-A-90 90 112 135 100 127 135 12.5 12.5 8-M8×25 ETP-A-100 100 125 148 110 139 147 13.5 13 8-M8×25 *L1 and L2 are dimensions when the ETP-CLASSIC is mounted. These values may vary slightly depending on the fi t tolerances of the shaft diameter and internal hub diameter. *The nominal diameter of the clamping bolt M is equal to the quantity minus the nominal diameter of the screw threads times the nominal length. ETP-A (B) Types [Specifications] Model Rated torque ［N・m］ Rated thrust ［N］ Rated radial load ［N］ Shaft contact pressure ［N/mm2］ Hub contact pressure ［N/mm2］ Tightening torque ［N・m］ Moment of inertia ［kg・m2］ Mass ［kg］ ETP-A-15-B 55 7300 2500 90 80 6 0.018 × 10-3 0.1 ETP-A-19-B 100 10600 5800 90 80 8 0.046 × 10-3 0.17 ETP-A-20-B 125 12500 6600 90 80 8 0.046 × 10-3 0.16 ETP-A-22-B 135 12300 8200 90 80 8 0.065 × 10-3 0.19 ETP-A-24-B 200 16700 9800 90 80 8 0.067 × 10-3 0.2 ETP-A-25-B 250 20000 10600 90 80 8 0.071 × 10-3 0.19 ETP-A-28-B 300 21400 13100 90 80 8 0.12 × 10-3 0.26 ETP-A-30-B 420 28000 14700 90 80 8 0.14 × 10-3 0.29 ETP-A-32-B 420 26300 16300 90 80 8 0.20 × 10-3 0.35 ETP-A-35-B 650 39500 18800 90 80 8 0.25 × 10-3 0.4 ETP-A-38-B 750 39500 21200 90 80 8 0.31 × 10-3 0.43 ETP-A-40-B 940 47000 22800 90 80 8 0.44 × 10-3 0.55 ETP-A-42-B 940 44800 24400 90 80 8 0.47 × 10-3 0.55 ETP-A-45-B 1290 57300 26900 90 80 13 0.69 × 10-3 0.71 ETP-A-48-B 1570 65400 29300 90 80 13 0.83 × 10-3 0.78 ETP-A-50-B 1900 76000 30900 90 80 13 1.05 × 10-3 0.86 ETP-A-55-B 2500 90900 35000 90 80 13 1.43 × 10-3 1.06 ETP-A-60-B 3400 113000 39100 90 80 13 2.15 × 10-3 1.37 ETP-A-65-B 3500 108000 43100 90 80 13 3.10 × 10-3 1.67 ETP-A-70-B 5200 149000 47200 90 80 32 4.08 × 10-3 2.04 ETP-A-75-B 6300 168000 51300 90 80 32 5.50 × 10-3 2.42 ETP-A-80-B 8800 220000 55000 90 80 32 8.10 × 10-3 2.64 ETP-A-90-B 11000 244000 60000 90 80 32 12.2 × 10-3 3.54 ETP-A-100-B 15500 310000 62000 90 80 32 19.9 × 10-3 4.8 *The rated torque values are those when the thrust is zero and the rated thrust values are those when the torque is zero. *The rated torque, rated thrust, shaft contact pressure, and hub contact pressure values given are measured values at a temperature of 20°C. *ETP-A-75, 80, 90, and 100-B are made to order.