日本Showa正和DPB德斯特柱塞DPB15-3 Piston distributors for the volumetric type system Distributes pre-measured volumes of oil utilizing the pump’s direct pressure   Utilizing the pump’s discharge pressure, the DPB model Dester Plunger distributes a pre-measured amount of oil from each port. According to the Dester Plunger’s body size, model numbers of 0, 10, 20 and 30 are allocated. Each model / size are available with various number of ports and discharge volumes. 日本Showa正和DPB德斯特柱塞DPB15-3 Form code Specifications COMPONENTS MODEL CODE Supply Connection Outlet Connection Supply Nipple Copper Gasket Rubber Packing Bushing Sleeve Sealing Plugs Bushing Sleeve Sealing Plugs DPB0Type — — — PA6 PB6 PG10C, PG10N or PG006 φ3.2 PA3.2 φ3.2 PB3.2 PG8C DPB10Type — — — PA6 PB6 PG10C, PG10N or PG006 PA4 PB4 PG8C, PG004 or PG104 DPB20Type φ6 PD612 311-0394 3-5885 PA6 PB6 PG12C or PG12N PA4 PB4 PG8C, PG004 or PG104 φ8 PD812 311-0394 3-5885 PA8 PB8 DPB30Type φ6 PD612 311-0394 3-5885 PA6 PB6 PG12C or PG12N PA4 PB4 PG8C, PG004 or PG104 φ8 PD812 311-0394 3-5885 PA8 PB8     SPECIFICATION MODEL CODE Number of Outlet Ports Discharge Vol. (c㎥/st) Discharge Nipple Code Operating Pressure Connection Size Inlet Port Outlet Ports DPB0 2,3,5 0.015 3-5460 0.9～3MPa M10×1.0 M8×1.0 0.03 3-5461 0.05 3-5462 0.08 3-5463 DPB10 1,2,3,5, 6,8,10 0.03 3-6819 0.8～3MPa M10×1.0 M8×1.0 0.06 3-6820 0.1 3-6821 0.16 3-6822 DPB20 (DPF20) 1,2,3,5, 6,8,10 (2,3,5) 0.1 3-1456 0.8～3MPa M12×1.0 M8×1.0 0.2 3-1457 0.4 3-1458 0.6 3-1459 DPB30 1,2,3 0.2 3-1443 0.8～3MPa M12×1.0 M8×1.0 0.4 3-1444 0.6 3-1445 1.0 3-1446 1.5 3-1447 ※Recommended Viscosity: 20 to 500m㎡/S   Drawing