日本智科CHIKO沸石ZEO-13000 Ultra-high pressure laser clean dust collector   This is an ultra-high pressure laser clean dust collector, not available from any other company. Collects fumes and dust scattered in the immediate vicinity. Ultra-high pressure type, resistant to heavy loads. Suitable for dust collection with branching and suction with a thin piping nozzle.             Image Slide 1 CHP-5000AT3-DSA-UD Download manual in pdf Features Incorporates new “UD” feature During maintenance of the primary filter chamber, the upper section of the chamber (pulse chamber / blower control chamber) can be lifted or lowered manually. The primary filter chamber can be easily removed. Dust tray The up/down lift mechanism makes it easy to attach and remove the dust tray.Casters attached with the dust tray makes it convencient to remove without any effort.It is then easy to dispose of the dust and to replace the zeolite. Large inspection window You can check the zeolite scattering status, the effective-ness of the pulse jet in removing dust, the suction status, and the condition of the filter through this window. Control panel AT3 panel See features page for more details. Features Ethernet / RS-485 Option feature All functions that can be operated on the AT3 panel can be operated by a PC with Ethernet or RS-485 communication. Remote control Remote cable (sold separately/model: Using MT-173-8 (3 m) enables remote operation of peripheral equipment. Motor cable receiving port on main body 1.Operation input signal 2.Operation pressure signal (DC1-5V) 3.Filter clogging signal 4.Remote-control operation switching input signal 5.Operating signal 6.Abnormality signal 7.Change of operating level input signal (DC0-5V) 8.Gnd Operation ON/OFF Change capacity level (air volume) Product structure and feautures The zeolite is pre-coated by a proprietary scattering mechanism. 1. Primary filter Long filter life is achieved even during the collection of fine dust and viscous fumes caused by laser processing. Dust peeling properties improved with teflon filter. Airborne fumes and dust particles are sucked in by the suction blower, stirred up with zeolite from the scattering port then laminated on the filter as the zeolite is activated. 2. Filter cleaning function [Pulse type] We have installed a proprietary continuous pulse air (compressed air) cleaning function. 3. Blower Equipped with a relief valve. Operates when a specified pressure level is exceeded to protect the blower from overheating. Activated carbon Deodorizing activated carbon can be installed as an option. List of application Extraction of fumes and dust during battery sealing process Removal of dust and fumes from laser cutting lithium-ion battery electrodes Removal of dust and fumes from laser cutting polarizing plate Removal of dust from silicon isolator Removal of dust when using laser cutting sheet for interior work Dimensions CHP-5000AT3-DSA-UD Filter Type Model Primary filter Zeolite Type Number Total filtration area CHP-5000AT3-DSA-UD CS-200-500-75P-R ４ 12㎡ ZEO-13000(13.0kg)