日本三木MIKIPULLEY变速器AP-124-MA/AP-164-MA AP Models （single-type variable-pitch pulleys） Specifications AP Models AP Models [Specifications] Model Motor in use Driven side speed changer Belt Speed change ratio 50Hz 60Hz Output rotation speed (r/min) Output torque Output rotation speed (r/min) Output torque ［N・m］ ｛kgf･m｝ ［N・m］ ｛kgf･m｝ AP-86-MA 0.2 kW4P P-86-MA A 1:2.2 950～2150 1.6～0.7 ｛0.16～0.07｝ 1140～2590 1.4～0.6 ｛0.14～0.06｝ 0.2 kW4P P-98-MA A 1:2 820～1720 1.9～0.9 ｛0.19～0.09｝ 990～2060 1.6～0.8 ｛0.16～0.08｝ AP-98-MA 0.4 kW4P A 1:2 1000～2050 3.1～1.5 ｛0.31～0.15｝ 1200～2460 2.6～1.3 ｛0.26～0.13｝ 0.4 kW4P P-124 -MA A 1:1.9 890～1710 3.5～1.8 ｛0.35～0.18｝ 1070～2060 2.9～1.5 ｛0.29～0.15｝ AP-124-MA 0.75 kW4P P-124-MA B 1:2.2 950～2150 6.1～2.7 ｛0.61～0.27｝ 1140～2590 5.1～2.3 ｛0.51～0.23｝ 0.75 kW4P P-164-MA B 1:2 810～1660 7.2～3.5 ｛0.72～0.35｝ 970～2000 6.0～2.9 ｛0.6～0.29｝ AP-164-MA 1.5 kW4P C 1:2.4 920～2230 12.7～5.2 ｛1.27～0.52｝ 1110～2680 10.5～4.4 ｛1.05～0.44｝ 1.5 kW4P P-218-MA C 1:2 680～1360 17.2～8.6 ｛1.72～0.86｝ 810～1640 14.4～7.1 ｛1.44～0.71｝     [Belt Number and Distance between Shafts] Model Driven side speed changer Belt number Distance between shafts［mm］ AP-86-MA P-86-MA A-20 A-21 A-22 A-23 A-24 A-25 153 165 179 191 204 216 AP-86-MA P-98-MA A-20 A-21 A-22 A-23 A-24 A-25 143 155 169 181 194 206 AP-98-MA P-98-MA A-21 A-22 A-23 A-24 A-25 A-26 147 160 172 186 198 211 AP-98-MA P-124-MA A-23 A-24 A-25 A-26 A-27 A-28 163 177 189 202 215 227 AP-124-MA P-124-MA B-25 B-26 B-27 B-28 B-29 B-30 168 181 194 206 220 232 AP-124-MA P-164-MA B-28 B-29 B-30 B-31 B-32 B-33 190 203 216 228 241 254 AP-164-MA P-164-MA C-32 C-33 C-34 C-35 C-36 C-37 211 224 237 249 262 275 AP-164-MA P-218 C-38 C-39 C-40 C-41 C-42 C-43 241 254 267 279 293 305   [Dimensions]   Unit ［mm］ Model A B J L M P1 P2 Q R T D W U Max. P.D. Min. P.D. Mass ［kg］ AP-86-MA 86 93 46 156 54 18 3.5 7 70 18 11 - - 77 51 1.7 AP-98-MA 98 103 50 166 54 19 3.5 7 70 20 14 5 16 89 62 1.9 AP-124-MA 124 126 68 196 62 22 5 10 88 24 19 6 21.5 113 75 3.2 AP-164-MA 164 137 68 211 66 25 7 14.5 88 30 24 8 27 150 96 4.8 *Use 1800 r/min or less for the input rotation speed. (The 4-pole motor drive is appropriate) [Aadapter] Model Bore depth[mm] Supported shaft diameters (adapter bore)φD [mm] 10 11 12 13 14 15 16 18 19 20 22 24 25 P-86-MA 30 ◎ ◎ ◎ ◎ ◎ ◎ ◎ P-98-MA 40 ◎ ◎ ◎ ● ● ● ● ● P-124-MA 50 ● ● ● ● ● ● ● ● ● P-164-MA 50 ● ● ● ● ● ● 〇 〇 〇 * Bores marked with symbols above are available. ● , ◎ , and ○ indicate adapter type, and ▲ indicate straight type. * Adapters indicated as ◎ do not have a keyway. Before using with a shaft having a key, first remove the key. * ○ indicates model that includes an L key, since adapter specifications prevent a parallel key from fitting. Use this L key when mounting. * Bore diameters for the L key distinguish between the old JIS and new JIS codes. Specify when ordering. [Placement]   Unit ［mm］ Combination AP-86-MA P-86-MA AP-86-MA P-98-MA AP-98-MA P-98-MA AP-98-MA P-124-MA AP-124-MA P-124-MA AP-124-MA P-164-MA AP-164-MA P-164-MA AP-164-MA P-218 H 25 24.5 25 31 34 39.5 44 42.5 C-placement X1 0 1 0 3 0 3 0 1.5 Z-placement X2 39.5 40.5 41.5 44.5 49 52 57 58.5