日本OMRON欧姆龙镜柱F39-SML1630/F39-SML1950 日本OMRON欧姆龙镜柱F39-SML1630/F39-SML1950 Protective Bar   Appearance Model Remarks F39-PB[][][][] *1 2 Light Curtain brackets 4 mounting brackets 0 to 4 intermediate brackets for backside mounting (quantity required for the sensing width) 0 to 4 intermediate brackets for mounting to the sides (quantity required for the sensing width) F39-PB[][][][]-S *1 *2 1 Light Curtain bracket 2 mounting brackets 0 to 2 intermediate brackets for backside mounting (quantity required for the sensing width) 0 to 2 intermediate brackets for mounting to the sides (quantity required for the sensing width)     Note: The following are not provided with the Protective Bars.           • Safety Light Curtain           • Safety Light Curtain Top/Bottom Brackets           • Wall Mounting Screw Unit *1. The same four digits indicating protective height that are used in the Sensor model number ([][][][]) are used in the         part of the Protector model number. *2. Purchase the F39-PB[][][][] (which contains two sets of brackets) to use Protective Bars for both the Emitter and         Receiver.   Test rod (Sold separately)   Diameter Model 14mm dia. F39-TRD14 20mm dia. F39-TRD20 25mm dia. F39-TRD25 30mm dia. F39-TRD30   Mirror Column   Appearance Applicable light curtain Column height Model F3SJ Series Safety Light Curtain (Operating range becomes 15% shorter than the rating) Protective height up to 0880 990 mm F39-SML0990 Protective height up to 1200 1,310 mm F39-SML1310 Protective height up to 1520 1,630 mm F39-SML1630 Protective height up to 1840 1,950 mm F39-SML1950   Sensor Mounting Bracket (Sold separately)   Appearance Specifications Model Application Remarks Top/bottom bracket F39-LJB1 Top/bottom bracket for F3SJ-E/B 2 for an emitter, 2 for a receiver, total of 4 per set Intermediate bracket F39-LJB2 *1 *2 In combination use with top/bottom bracket for F3SJ-E/B Can be used as free-location bracket. 1 set with 2 pieces One-touch bracket F39-LJB3-M6 *1 One-touch bracket for F3SJ-E/B Supports M6 slide nut for aluminum frame. 1 set with 2 pieces F39-LJB3-M8 *2 One-touch bracket for F3SJ-E/B Supports M8 slide nut for aluminum frame. One-touch M6 bracket One-touch M8 bracket F39-LJB3-M6K *1 Bracket to mount an intermediate bracket to the aluminum frame with a single touch. Hexagon socket head cap screws (M6 x 10) are included. F39-LJB3-M8K *2 Hexagon socket head cap screws (M8 x 14) are included. Compatible mounting bracket F39-LJB4 Mounting bracket used when replacing existing area sensors (F3SJ-A or F3SN) with the F3SJ-E/B. 2 for an emitter, 2 for a receiver, total of 4 per set Contact mount bracket F39-LJB5 Bracket to closely contact the back side of the Sensor. 2 for an emitter, 2 for a receiver, total of 4 per set     Note: All the sensor mounting brackets for F3SJ-E are sold separately. *1. Combining F39-LJB2 and F39-LJB3-M6K makes F39-LJB3-M6. *2. Combining F39-LJB2 and F39-LJB3-M8K makes F39-LJB3-M8.