日本HAKKO八兴软管SJ-1/16"X1/8"-BK/SJ-3/16" X5/16"-BK  Product Standard Standard Size (mm size) Model Number Standard Length I.D.  × O.D. Working Pressure Working Pressure Minimum Bend Radius 20 ∘C 20 ∘C 20 ∘C m mm MPa Bar mm E-SJ-2 ×4-BK 20 2 ×4 0 - 0.6 0 - 6 15 100 E-SJ-3 ×5-BK 20 3 ×5 20 100 E-SJ-4 ×6-BK 20 4 ×6 25 100 E-SJ-4.3 ×6.4-BK 20 4.3 ×6.4 30 100 E-SJ-5 ×7-BK 20 5 ×7 0 - 0.5 0 - 5 40 100 E-SJ-6 ×8-BK 20 6 ×8 0 - 0.4 0 - 4 50 100 E-SJ-8 ×10-BK 20 8 ×10 0 - 0.4 0 - 4 90 100 E-SJ-8 ×12-BK 20 8 ×12 0 - 0.6 0 - 6 50 100 Standard Size (inch size) Model Number Standard Length I.D.  × O.D. Working Pressure Working Pressure Minimum Bend Radius 20 ∘C 20 ∘C 20 ∘C m mm MPa Bar mm E-SJ-1/8"  × 1/4"-BK 20 3.18 ×6.35 0 - 0.6 0 - 6 20 100 E-SJ-3/16"  × 1/4"-BK 20 4.76 ×6.35 0 - 0.5 0 - 5 45 100 E-SJ-1/4"  × 3/8"-BK 20 6.35 ×9.53 0 - 0.6 0 - 6 45 100 Made-to-Order Size Example Model Number I.D.  × O.D. Working Pressure Working Pressure Minimum Bend Radius 20 ∘C 20 ∘C 20 ∘C mm MPa Bar mm SJ-1 ×3-BK 1 ×3 0 - 1.0 0 - 10 10 SJ-1.5 ×3-BK 1.5 ×3 0 - 0.6 0 - 6 10 SJ-2.5 ×4-BK 2.5 ×4 0 - 0.6 0 - 6 25 SJ-3 ×4-BK 3 ×4 0 - 0.6 0 - 6 30 SJ-5 ×8-BK 5 ×8 0 - 0.6 0 - 6 30 SJ-7 ×10-BK 7 ×10 0 - 0.4 0 - 4 50 SJ-9 ×12-BK 9 ×12 0 - 0.5 0 - 5 65 SJ-1/16"  × 1/8"-BK 1.59 ×3.18 0 - 0.6 0 - 6 10 SJ-3/32"  × 5/32"-BK 2.38 ×3.97 0 - 0.3 0 - 3 25 SJ-3/16"  × 5/16"-BK 4.76 ×7.94 0 - 0.5 0 - 5 30 SJ-3/8"  × 1/2"-BK 9.53 ×12.7 0 - 0.4 0 - 4 70 Temperature Range : -20 - 80  ∘ C (-4 ∘ F - 176 ∘ F) Color : Black *Please note that the value of "Minimum Bend Radius" is NOT equal to that of "Flexibility." About "Flexibility," please refer to the value of "Amount of Deflection" in the section of Technical Information or request the sample. *If you are interested in Made-to-Order size, please fill out the following form. (We can also produce a special size that is not listed on the table above. Please note that MOQ applies for made-to-order size.)