日本RIKEN理研负载监控器RM-7414 Load monitor NEW SELBER Load monitorRM-7414 External Dimensions PDF If you use CAD data, we will accept it by email. Characteristics ● Ideal for measuring load capacity. Up to 1000t can be measured for capacity. ・4 load cells RS-711H (100t) can measure up to 400t. ・4 load cells RS-712H (250t) can measure up to 1000t. * The main unit display of the load monitor is kN (kilo newton). 5 patterns of load cell settings can be registered. Accessories Specifications Name NEW SELBER Load monitor Model RM-7414 Compatible load cell RS-711H／RS-711H2／RS-712H Number of load cell channels 4ch Operating Temperature Limit 0~50°C (operating range), 10~40°C (guaranteed range), (no condensation) Ambient atmosphere when used Free from corrosive gas and dust Power supply AC100〜240V　50/60Hz External Dimensions 260 (W) x 170 (H) x 136 (D) mm (excluding terminal block and other protrusions) Display Color TFT LCD (7.5-inch) Number of dots Horizontal 640 x Vertical 480 Backlight life 50,000 hours (Typ.) Built-in battery Lithium battery CR2032 1 life (reference) 5 years (25°C) Name NEW SELBER load cell (100t・250t) Model RS-711H RS-711H2（※） RS-712H Rated load 200～1000kN 200～1000kN(per piece) 500～2500kN External Dimensions (D×H(mm)) (Excluding protrusions) φ102×88 φ102×88(per piece) φ157×130 Weight Approx. 3.6kg Approx. 7.2kg (2 pieces total) Approx. 13.9kg Operating Temperature Limit 10～40℃(No Condensation) 10～40℃(No Condensation) 10～40℃(No Condensation) * The RS-711H2 main unit is a set of two RS-711H main units. Name Dedicated carrying case for load cell Model RS-711H RS-711H2（※） RS-712H External Dimensions (W×H×D (mm)) (Excluding protrusions) 197×155×167 317×155×197 317×222×237 Weight Approx. 1.9kg Approx. 3.2kg Approx. 4.0kg Name Dedicated relay cable for load cell Model RS-715C（5m） *The specifications and the contents described in this instruction manual are subject to change without prior notice.