日本三木Miki Pulley联轴器AL-110 22H-40H/L-110 AL Models Specifications AL Models AL Models [Specifications] Model Torque Misalignment Max. rotation speed ［min-1］ Moment of inertia ［kg・m2］ Mass ［kg］ Nominal ［N・m］ Max. ［N・m］ Parallel ［mm］ Angular ［°］ Axial ［mm］ AL-035 0.5 1.5 0.1 0.5 ＋0.3 18000 0.38×10-6 0.01 AL-050 1.5 4.5 0.2 1.0 ±0.5 12000 5.10×10-6 0.06 AL-070 3 9 0.2 1.0 ±0.5 9000 1.79×10-5 0.12 AL-075 5 15 0.2 1.0 ±0.5 7000 5.36×10-5 0.21 AL-090 8 24 0.3 1.0 ±0.5 6000 1.15×10-4 0.31 AL-095 10 30 0.3 1.0 ±0.5 6000 1.40×10-4 0.36 AL-100 25 75 0.3 1.0 ±0.7 5000 4.34×10-4 0.78 AL-110 50 150 0.3 1.0 ±0.7 4000 1.43×10-3 1.56 *Max. rotation speed does not take into account dynamic balance or mounting misalignment. *The moment of inertia and mass are measured for the pilot bore. [Dimensions] couplings Unit ［mm］ Model d1, d2 D L L1 L2 Pilot bore Min. Max. AL-035 4 4 8 16.1 20.5 6.5 7.5*1 AL-050 5 6 16 27 43.2 15.5 12.2 AL-070 5 6 20 35 49.2 18.5 12.2 AL-075 5 7 26 45 54.4 21.0 12.4 AL-090 5 9 28 54 55.0 21.0 13.0 AL-095 5 9 28 55 61.0 24.0 13.0 AL-100 5 11 36 66 88.0 35.0 18.0 AL-110 8 11 48 85 110.0 44.0 22.0 *"Pilot bore" refers to center processing. Minimums and maximums for d1 and d2 are values at the MIKI PULLEY standard hole-drilling standards. *The value marked *1 leaves a 1 mm space for the thickness of the spider body. [Dimensions] Spider Unit ［mm］ Coupling Model Spider Model L2 R K AL-035 L-035 6.5 ― ― AL-050 L-050 12.2 ― ― AL-070 L-070 12.2 ― ― AL-075 L-075 12.4 20 6.0 AL-090 L-090/095 13.0 22 6.3 AL-095 L-090/095 13.0 22 6.3 AL-100 L-100 18.0 26 6.0 AL-110 L-110 22.0 30 6.0