Spec Detail Specifications and design of the products are subject to change without notice for the product improvement. Item Specifications Product Number ER-F12A Part Number ER-F12A Products Name Fan Type Ionizer Product details Standard fan type Applicable regulations CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) Charge removal time 1 sec. approx.(±1,000 V → ±100 V) (Note): Typical value at 200 mm 7.874in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. Ion balance ±10 V or less (Note): Typical value at 300 mm 11.811in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. Supply voltage 24 V DC ±10% Current consumption 700 mA or less Discharge method High-frequency AC method Discharge output voltage ± 2 kV approx. Main functions Error output, Discharge halt input Indicators Discharge error (Red), Fan error (Red), Power (Green), Discharge (Green) Ozone generation 0.04 ppm or less (Note): Typical value at 200 mm 7.874in from directly in front of air outlet, fan speed MAX, straight louver, with no filter installed. Ambient temperature 0℃ to +50℃ +32℉ to +122℉ (No dew condensation allowed), Storage : -10℃ to +65℃ +14℉ to +149℉ Ambient humidity 35% RH to 65% RH (No dew condensation allowed), Storage : 35% RH to 65% RH Grounding method C (capacitor) grounding Material Enclosure : ABS, Louver : ABS, Discharge needle unit : PBT, Discharge needle : Tungsten, Bracket : SPHC Weight New weight : 790 g approx. Accessories Straight louver : 1 pc. (Note), Angle louver : 1 pc., Caution label : 1 set, Rubber cushion : 1 pc. (Note): The discharge needle unit is loaded on the straight louver before shipment. Remark If not specified, the ambient temperature for measurement is +20℃ +68℉. scroll scroll scroll Accessories (Option) Product number Part number Product Details Product name ER-F12ANT ER-F12ANT Discharge needle unit - Discharge needle unit ER-F12FX5 ER-F12FX5 Air filter - Air filter