系列：微型鼓风机 TF037C-2100-F 额定电压 10～30 VDC 额定电源电流 0.9 A Max. 额定消耗功率 21.6 W Max. 额定转速 6,000～45,000 rpm *小空气流量 5 L/min 工作时周围气压 770～1,060 hPa 噪音 65.0 dB(A) 以下 重量 94 g 材质 树脂完全符合UL94 V0 备注 附带安装支架 驱动器配套也销售 [P/N: TF037F-2100-P]专用驱动器单品也销售。 ■ FEATURES ● Aerodynamic bearings ● Compact / Light weight ● High static pressures ● Low vibration ● Long life due to aerodynamic bearings without heat dependence ● Two type available with or without Fixing Leg ● Resin in full compliance with UL94 V0 STANDARD SPECIFICATIONS No. Item Part number TF037C-2100-F TF037C-2000-F Remarks 1 Operating Voltage Range 10～30 V 2 Direction of Rotation CCW(Counterclockwise viewing from the air vent side) 3 Kind of Gas Normal Air Do not use to any corrosive gas. 4 Type of Motor 3 phase 8 pole Brushless (Y Connection) 5 Number of Poles 8 Poles (4 pole pairs) 6 Bearing Type Aero Dynamic Bearing 7 Recommended Mounting Position Axis Vertical (Plate Downward) Avoid vibration and shock while the product is operating. It may damage product 8 Maximum Input Coil Current 3.0 A Max. In case, the rotor is lock up, the coil may be destroyed by surge current. The protection circuit to prevent surge current must be installed for safety. 9 Power Supply Current 0.9 A Max. at 3.0 kPa 100 L/min Temperature：23±5°C, Humidity：45～85%RH, Air Pressure：101.3 kPa 10 Power Consumption 21.6 W Max. 11 Minimum Flowrate 5 L/min 12 Torque Constant 0.0025 N·m/A 13 Rotation Speed Range 6,000～45,000 rpm Rotation Speed = Hole Sensor Frequency×15