功能

• The Takayasu standard kinematic mirror holder is equipped with the company's original locking mechanism (NOMI LOCK TM).
• NOMI LOCKTM A new type of locking mechanism that allows you to vary the torque of the adjustment screw.
• Ideal for applications such as interferometers and laser processing equipment where beam displacement after adjustment is a problem.
• Kinematic mirror holders have a simple structure, excellent rigidity and stability, and are used in interferometers and laser resonators.
• There are two types, MHG-HS which is a Takayasu type mirror holder and MHG-MP which is a mass production type mirror holder.
• The high stability type (MHG-HS) has a large screw knob that allows adjustment of the fulcrum as well as the two points of action, and also the vertical displacement of the mirror.
• Even if NOMI LOCK TM is used in the interferometer, the optical axis deviation is within one interference fringe.
• (Individual differences due to locking operation)
• The mirror side is held in place at three points so that the stress generated when the mirror is held in place can be adjusted.
• Since there is no restriction on the effective diameter due to the screw ring, a large effective diameter can be obtained with reflected or transmitted light.
• Can be attached to post stand PST (sold separately) or rod RO of tip M6 (sold separately).
• The production type (MHG-MP) can be fixed directly to the plate or stage with M4 screws.
• The mass-produced model (MHG-MP) comes with a NOMI IOCKTM dedicated spanner.
• * The center of rotation of the mass-produced type (MHG-MP) is located outside the mirror (the fulcrum of the holder).
• * Use the rod mounting plate (MHG -** BPRO) when fixing the Takayasu standard (MHG-HS) to a flat surface.
• * The optical axis is 10 mm higher when the rod mounting plate (MHG -** BPRO) is used.
• * Since the mirror frame abuts on the rear side of the mirror, the position of the reflecting surface changes when the mirror thickness changes.