Compact size, high power (0.7W-26W). Variety of line ups (224 mode in all). For variety of gear heads (32 Dia-80 Sq and others). Features: Long-life: Intermittent operation over 1 million cycles with optimized brush design. Continuous operating life of 1000 hours. High output: High heat dissipation and heat resistance achieves higher output. High strength: High radial load capacity due to robust construction, large diameter output shaft and ball bearings. Low noise and increased insulation due to newmore Unit of Measure                          Imperial                         Metric                             Both                      Specifications Dimensions Additional Information Customize Product Type DC Motor with Gearbox 6DG Series DME33 Model Code BB Frame Size 61 x 49.5 mm2.402 x 1.949 in Diameter 1.26 in32 mm Gear Ratio 250 Rated Output 3.0 W Rated Voltage 24 V Current Rating 220 mA0.22 A Rated Speed 16 r/min Rated Torque 138.87 oz·in0.98 N·m Note 6DG gearbox are available with either 4.5 mm diameter mounting holes or M4 x 6 mm tapped holes. Gearboxes with 4.5 mm diameter mounting holes are available from stock. When ordering, please write the motor model and gearbox model numbers separately, as in the following example; DME33B6HPB (Pinion shaft motor) 6DG_ (Gearbox) Gearboxes with M4 x 6 mm tapped mounting holes are available on request. When ordering, please write the combine motor and gearbox model, as in the following example ; DME33B6H_B