产品详细内容
产品型号: 61-4947-27
产品品牌: IKA
功能
- High viscosity mechanically controlled stirrer RW28 digital capable of stirring up to 80 L (vs. water).
- Medium-sized stirrer for laboratory and pilot plants.
- As a function to prevent overheating of the motor, the motor automatically stops when the internal heat of the motor becomes too high.
- We have a wide variety of accessories such as container presses, stirring shafts and clamps.
- The number of revolutions is adjusted without any step (two speed ranges).
- The stirring blade is chuck type and easy to remove.
- Quiet driving, steady stirring.
规格
- 大处理容量 (针对H2O) :80L
- 马达输出:220W
- 马达输入:90W
- 旋转速度显示器:LED
- 转速范围:60-1400rpm
- 高粘度:50000mPas
- 搅拌轴 大输出功率:90W
- 连续使用时间:1
- 搅拌轴 大扭矩:900Ncm
- 搅拌轴 大扭矩60 rpm (负载) :1144Ncm
- 搅拌轴 大扭矩100 rpm (负载) :900Ncm
- 搅拌轴 大扭矩1000 rpm (负载) :86Ncm
- 大扭矩,齿轮I) :900Ncm
- 大扭矩 (齿轮II) :300Ncm
- 转速范围I (50Hz) :60-400rpm
- 转速范围II (50Hz) :240-1400rpm
- 旋转速度范围I 小旋转速度 (60Hz) :72 rpm
- 旋转速度范围I 大旋转速度 (60Hz) :480 rpm
- 旋转速度范围I 小旋转速度 (60Hz) :288 rpm
- 旋转速度范围II 大旋转速度 (60Hz) :1680 rpm
- 转速控制:无级
- 准确的转速设定:1±rpm
- 转速测量误差 (齿轮I) :10±rpm
- 搅拌叶片卡环:卡环
- 大夹头范围:1公厘
- 小卡盘范围:10公厘
- 转轴通孔直径:10.5mm
- 转轴通孔:那里
- 支撑臂直径:16公厘
- 支撑臂长度:145公厘
- 正常扭矩:9Nm
- 外壳材料:铝铸造涂层/热塑性聚合物
- 杂讯值:62.5DB (A)
- 机身尺寸 (宽x高x深) :123 x 364 x 252公厘
- 重量:7.5公斤
- DIN EN 60529标准保护等级:IP40
- 电压:220-240/115/100V
- 频率:50/60Hz
- 输出:220瓦
- :RW28数字式 (均质机) ,R2723扩展支架,R1385螺旋桨式搅拌叶片,R271轮毂头
相关产品推荐
您可能还对以下产品感兴趣
61-4690-61 Deckworks Refill Tip Low Binding 10μl半透明无灭菌 4153
型号: 61-4690-61
品牌: Corning Incorporated
1-3173-01-22 Personal Incubator 215 x 215 x 150 mm with Pre-Shipment Inspection Document UI-50
型号: 1-3173-01-22
品牌: AS ONE Corporation
4-1726-01-22 Large Oil Bath 7L with Pre-Shipment Inspection Document BOB-300
型号: 4-1726-01-22
品牌: AS ONE Corporation