日本showa正和容积式分配器DPB-26/DPB-28/DPB-210 日本showa正和容积式分配器DPB-26/DPB-28/DPB-210 DPB Dester Plunger   Piston distributors for the volumetric type system Distributes pre-measured volumes of oil utilizing the pump’s direct pressure   Utilizing the pump’s discharge pressure, the DPB model Dester Plunger distributes a pre-measured amount of oil from each port. According to the Dester Plunger’s body size, model numbers of 0, 10, 20 and 30 are allocated. Each model / size are available with various number of ports and discharge volumes. Form code Specifications COMPONENTS MODEL CODE Supply Connection Outlet Connection Supply Nipple Copper Gasket Rubber Packing Bushing Sleeve Sealing Plugs Bushing Sleeve Sealing Plugs DPB0Type — — — PA6 PB6 PG10C, PG10N or PG006 φ3.2 PA3.2 φ3.2 PB3.2 PG8C DPB10Type — — — PA6 PB6 PG10C, PG10N or PG006 PA4 PB4 PG8C, PG004 or PG104 DPB20Type φ6 PD612 311-0394 3-5885 PA6 PB6 PG12C or PG12N PA4 PB4 PG8C, PG004 or PG104 φ8 PD812 311-0394 3-5885 PA8 PB8 DPB30Type φ6 PD612 311-0394 3-5885 PA6 PB6 PG12C or PG12N PA4 PB4 PG8C, PG004 or PG104 φ8 PD812 311-0394 3-5885 PA8 PB8     SPECIFICATION MODEL CODE Number of Outlet Ports Discharge Vol. (c㎥/st) Discharge Nipple Code Operating Pressure Connection Size Inlet Port Outlet Ports DPB0 2,3,5 0.015 3-5460 0.9～3MPa M10×1.0 M8×1.0 0.03 3-5461 0.05 3-5462 0.08 3-5463 DPB10 1,2,3,5, 6,8,10 0.03 3-6819 0.8～3MPa M10×1.0 M8×1.0 0.06 3-6820 0.1 3-6821 0.16 3-6822 DPB20 (DPF20) 1,2,3,5, 6,8,10 (2,3,5) 0.1 3-1456 0.8～3MPa M12×1.0 M8×1.0 0.2 3-1457 0.4 3-1458 0.6 3-1459 DPB30 1,2,3 0.2 3-1443 0.8～3MPa M12×1.0 M8×1.0 0.4 3-1444 0.6 3-1445 1.0 3-1446 1.5 3-1447 ※Recommended Viscosity: 20 to 500m㎡/S   Drawing