日本Ohm欧姆电机形成开关OM-1 日本Ohm欧姆电机形成开关OM-1 Insulation cover for micro switches MICROCASE Provides insulation for a micro switch as well as retaining and protecting its cables   Certificates/Approvals EU RoHS2 China RoHS CE UL CSA PSE ・Applications　Protects micro-switch and related cables Designed for micro switches with a fitting pitch: P= 25.4 mm (1 inch) Applicable micro switches Manufacturer Model OMRON Standard type, A, X、Z types AZBIL Basic models, BZ, BA/BE series PANASONIC New A series of basic models (AM1) *OHM does not supply micro switch itself. Model/Specifications Model Micro switch type Applicable cable diameter Working emperature Weight Q'ty per package 1st groove 2nd groove 3rd groove OM-1 45° type Ø4 - 5 Ø5 - 8 Ø8 - 10 -25 to +70℃ 19g 10 pcs. OM-2 90° type Ø5 - 6 Ø6 - 9 - 21g 20 pcs. Dimensional drawing   Materials   Instructions 1. Cut the clamp on the MICROCASE to match the required cable diameter. 2. Insert the micro switch to which cable is connected into the MICROCASE. 3. The micro switch is set in MICROCASE. 4. Tighten the screw on the clamp to secure cable. 5. •Fasten the micro case as required using the LS mounting bracket.   ・Tightening torque and tensile strength differ depending on the material of cable coating and its hardness. ・Tensile strength drops when outer cable diameter changes due to aging. Cautions ・Do not paint. ・This product is not waterproof. ・Use and storage under the following conditions should be avoided. Failure to it can lead to deterioration of product quality. Outside the range of working humidity and temperature Water vapor contained or high temperature/humidity air Acidic, alkaline or organic solvent-containing air (See Technical Data "Chemical resistance"） For any other special environmental conditions, please contact us before use.