功能

• This product was developed to join materials such as polyethylene and PTFE, which were difficult or impossible to join with conventional adhesives.
• Water resistance is perfect and salt water resistant.
• For general use, it exhibits the best characteristics under temperatures of about −10 °C to +50 °C.
• At 20°C (room temperature), the viscosity doubles after 72 hours.
• The best feature is that it is made from special synthetic resin and does not contain solvents. For this reason, the part that has been put together after use does not harden and has a cushioning effect, so it can be bent.
• Adhesive force (adhesion force) is strong even for non-polar surfaces such as polyethylene and PTFE, and rough surfaces such as plywood, concrete and iron without selecting adherends.
• Since there is no need for special treatment to improve the bonding and the adhesive force (adhesive force) is strong, the amount of use is small and very economical.
• Apply silicone solution (or oil) to scissors, knife, etc., and cut. When you remove it, you can remove the rest by rolling it with tricrene, benzine, etc.
• Keep the tape warm during the cold season, and sometimes it is necessary to warm it when working.
• Remove dust, oil, water and other foreign matter from the surface of the adherend.