62-6178-58 Polybent (50 mm PTFE 0.2 μm) 1 Pack (10 pcs) 6713-1650
实验室仪器

62-6178-58 Polybent (50 mm PTFE 0.2 μm) 1 Pack (10 pcs) 6713-1650

型号: 62-6178-58
品牌: Cytiva (Whatman)
分类: 实验室仪器

产品描述

产品型号: 62-6178-58产品品牌: Cytiva (Whatman) 功能 Passed steril […]

联系我们

咨询热线

18866622123

微信咨询

微信号: ahyhk8

微信二维码

产品详细内容

产品型号: 62-6178-58
产品品牌: Cytiva (Whatman)

功能

  • Passed sterilization grade HIMA challenge test
  • The catch count of Brevundimonas diminuta was more than 10^7 CFU/cm2, which complies with ASTM standard F838-83.
  • This ability to retain microorganisms correlates with the 100% integrity test (evaluated in liquid form) in the manufacturing process (100% integrity test is only performed in capsule form).
  • An integrated filter developed for sterile venting. Consisting of only one standardised material (PTFE membrane and polypropylene housing) helps simplify the approval process.
  • Hydrophobic PTFE membrane with a pore size of 0.2 μm
  • Steam sterilization by autoclave is possible up to 50 times, and ethylene oxide gas is also supported.
  • Water breakthrough (WBT) test or bubble point test possible
  • Manufactured in a clean room facility
  • Both Directions Enabled
  • Note)Only for test and research purposes.

规格

  • Housing: Polypropylene
  • Filter Material: PTFE (Polytetrafluoroethylene)
  • Pore size: 0.2 μm
  • vents: inlet side
  • Support System: Polypropylene
  • bonding methods: heat welding
  • Voltage: 0.2 MPa (29psi) (if forward)
  • Water Test: 0.2 MPa (29psi)/15 sec.
  • Direction of filtration: reverse filtration is possible only at low pressure
  • Sterilization: Autoclavable at 121°C for 20 minutes (maximum temperature 132°C). It is possible to autoclave repeatedly, but use at the user's responsibility to avoid cross contamination. Perform the integrity test after autoclaving. Sterilization with ethylene oxide gas is possible.
  • No pyrogens: No response in the total LAL test
  • Effective Filtration Area: 16 cm2
  • Pore Diameter (μm): 0.2
  • Type of housing: 50 mm disc type
  • Connection Inlet: SB
  • Connection outlet: SB
  • SB= Stepped Hose Port: Can be connected to 6~10 mm (1/4”-3/8”) tubing

相关产品推荐

您可能还对以下产品感兴趣