67-0421-58 SparkFun Qwiic Dual Solid State Relay COM-16810
电子部品

67-0421-58 SparkFun Qwiic Dual Solid State Relay COM-16810

型号: 67-0421-58
品牌: SparkFun
分类: 电子部品

产品描述

产品型号: 67-0421-58产品品牌: SparkFun 功能 Description The Spark […]

联系我们

咨询热线

18866622123

微信咨询

微信号: ahyhk8

微信二维码

产品详细内容

产品型号: 67-0421-58
产品品牌: SparkFun

功能

  • Description
  • The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows rs to switch two AC loads from a low power microcontroller using the SparkFun Qwiic connect system. The board features two 25A/250VAC solid state relays that utilize the Zero Cross Trigger method so you can toggle two loads on a 60Hz AC carrier signal on and off up to 120 times per second!
  • An ATTiny84 acts as the "brain" of the SparkFun Qwiic Dual Solid Relay to accept I2C commands to toggle the two relays as well as a few other special commands. The I2C address of the ATtiny84A is software configurable so, if you have a seriously big power project in mind, you could daisy chain over 100 Qwiic Dual Solid State Relays.
  • Messing with such high voltage is dangerous! We've included many safety precautions onto the PCB including ground isolation between the relay and other circuitry and a milled out area isolating each side of AC. However, with all the safety precautions included with the SparkFun Qwiic Dual Solid State Relay, this is still a power accessory for rs who are experienced around, and knowledgeable about high AC voltage. If you're not comfortable with handling AC voltage in this way, you may want to check out the IoT Power Relay instead.
  • Note:The relays are rated for a max of 25A with forced air cooling. If you do not have forced air cooling, 10A max through the relays is recommended.
  • The SparkFun Qwiic connect system is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can't hook it up wrong.
  • Get Started with the SparkFun Qwiic Dual Solid State Relay Guide
  • Features
  • Operating Voltage:2.5-3.6V(3.3V recommended)
  • I2C Address:0x0A(Default)0x0B(Alternate via jumper select)
  • Load Voltage Range:12-280VAC
  • Max Current(Through Relay):25A(240VAC with forced air cooling)
  • Zero Cross Trigger
  • Normally Open Circuit Only
  • 2x Qwiic Connector

规格

相关产品推荐

您可能还对以下产品感兴趣

64-5663-45 Insulated DC-DC Converter 5 V 10 W CC10-1205SR-E
电子部品
68-2202-64 TIMI-MB Starter Kit DEV-19254
电子部品
64-5660-26 ZX Distance & Gesture Sensor SEN-13162
电子部品